AUTOMOTIVE SYSTEM DESIGN (ISO 26262) – PLUS EXAMINATION

This training is provided in cooperation with TÜV Rheinland to equip you with the knowledge needed to successfully implement the requirements of the international standard ISO 26262:2018.
On the fourth day of the course, you will sit the exam to become a certified TÜV Rheinland Functional Safety Engineer (Automotive).

BACK TO FUNCTIONAL SAFETY
  • TÜV Rheinland FS Engineer (Automotive)

    Training objectives & content

    On this course we provide experienced engineers with the know-how they need to successfully implement the requirements of ISO 26262. The training is ideal preparation for sitting the TÜV Rheinland exam, which takes place immediately after the course.

    CONTENT

    • Functional safety of electronic systems
    • Introduction to safety integrity (SIL, ASIL)
    • Relationships between ISO 26262 and the basic IEC 61508 standard
    • Homologation rules
    • Product liability
    • The international ISO 26262 standard
    • General methods and requirements
    • Assessing the life cycles of safety-relevant systems
    • Requirements relating to the management of functional safety
    • Requirements relating to the assessment of functional safety
    • The importance of the Automotive Safety Integrity Level (ASIL) system
    • Definition of requirements depending on the selected Automotive Safety Integrity Level
    •   4 Days
    •   from 9 - 17 o'clock
    •   Public | Inhouse
    •   DE | EN
    •   limited to 12 participants
    •   TUEV Rheinland FS Engineer (Automotive)
    The TÜV RHEINLAND technical inspectorate

    As part of our involvement in the functional safety programme, Kugler Maag Cie is an official partner of the TÜV Rheinland technical inspectorate. We also offer training to become a certified TÜV Rheinland Functional Safety Engineer (Automotive).

    TUV.COM

     

    TARGET GROUP OF THE COURSE ON AUTOMOTIVE SYSTEM DESIGN

    This training course is targeted exclusively at experienced engineers who are not only familiar with the development and implementation of embedded electronic systems used in cars but also develop systems themselves according to ISO 26262.

    To gain certification as a TÜV Rheinland Functional Safety Engineer (Automotive), you are required to

    • Pass the exam
    • Have at least three years of experience in the field of functional safety.

    You will also need to prove that you have a university education in a technology area (e.g. as an engineer, computer scientist, physicist). Evidence must be provided of a diploma (or similar) or an employer reference outlining your role as a technology specialist.

    Please note that all course materials are provided in English, so you must be fully competent in understanding technical content and the language used in English standards.

    If you are not yet familiar with the majority of terms contained in the ISO 26262 glossary, we recommend that you take the INTRODUCTORY COURSE on functional safety.

     

    KNOWING HOW IT’S DONE

    Whether its certification training you need or an individual workshop, you always benefit from the full advantages of our know-how. We will design the right training to match your needs, for you (individually) as an expert, or as an exclusive in-house course for your company. Our experts offer all courses in German and English.

    Smilja Mateja, Training Coordination

    Next training

    09.11. - 12.11 TÜV Rheinland FS Engineer - with exam

    EN
    Greater Stuttgart
    2.400 eur p.P.*

    01.03. - 04.03 TÜV Rheinland FS Engineer - with exam

    DE
    Greater Stuttgart
    2.160 eur p.P.*

    28.06. - 01.07 TÜV Rheinland FS Engineer - with exam

    EN
    Greater Stuttgart
    2.160 eur p.P.*

    25.10. - 28.10 TÜV Rheinland FS Engineer - with exam

    DE
    Greater Stuttgart
    2.160 eur p.P.*

    09.11. - 12.11 TÜV Rheinland FS Engineer - with exam

    EN
    Greater Stuttgart
    2.400 eur p.P.*

    01.03. - 04.03 TÜV Rheinland FS Engineer - with exam

    DE
    Greater Stuttgart
    2.160 eur p.P.*

    28.06. - 01.07 TÜV Rheinland FS Engineer - with exam

    EN
    Greater Stuttgart
    2.160 eur p.P.*

    25.10. - 28.10 TÜV Rheinland FS Engineer - with exam

    DE
    Greater Stuttgart
    2.160 eur p.P.*

    Book early to receive an early-bird discount or apply for a group discount on course fees.

    Extra value

    LEARNING IN A PLEASANT AND FRIENDLY ATMOSPHERE

    We look forward to welcoming you to our training courses. To make it easier for you to concentrate on your course, we do everything we can to make your stay as pleasant as possible. All catering requirements will be taken care of during your course, from snacks during breaks to lunch.

    If your course lasts more than one day, we would be delighted to invite you out for the evening. This is also a useful opportunity to discuss what you have learnt or experienced with other course participants and forge friendships.

    SINCE 2008

    We’re proud that we have been one of the pioneers of functional safety since 2008 and that this has given us the opportunity to leverage our experience in developing the ISO 26262 safety standard.

    Functional safety in automotive electronics? We’re the experts!

    700+ PROJECTS

    We have a wealth of experience in functional safety according to ISO 26262, having conducted over 700 projects with more than 100 clients worldwide.

    Functional safety in automotive electronics? We’re the experts!

    +100 SPECIALISTS

    To date, we have trained more than 100 specialists under the TÜV Rheinland Functional Safety (Automotive) certification scheme.

    Functional safety in automotive electronics? We’re the experts!

    +250 YEARS

    If we add up the experience of our experts in the field of functional safety, it comes to no less than 250 years.

    Functional safety in automotive electronics? We’re the experts!

    Classic manual

    Who wrote the classic manual on Functional Safety in Practice, or Functional Safety Essentials? We did.

    Functional safety in automotive electronics? We’re the experts!

    18 Experts

    We already have 18 experts certified under the TÜV Rheinland Functional Safety (Automotive) scheme, or privately approved as official trainers.

    Functional safety in automotive electronics? We’re the experts!

    CERTIFICATION

    We are a partner of the TÜV Rheinland certification scheme for Functional Safety Engineers (Automotive).

    Functional safety in automotive electronics? We’re the experts!

    Committee work

    We work as expert advisors to a variety of industry associations, for example through our committee work for the German Electrical and Electronic Manufacturers’ Association (ZVEI).

    Functional safety in automotive electronics? We’re the experts!

    Process & organisation

    Please note the TÜV Rheinland participation requirements: participants must have three years’ experience in functional safety.

    Information on the training programme

    Some courses take place several times a year as classroom training sessions. Others are only offered as in-house training.

    To make a binding reservation, book directly through the website or send us an order. We will confirm course dates as soon as we have received a minimum number of reservations. You will be sent all required information on course arrangements in advance. Fees include course materials, lunch and refreshments during breaks.

    Most of our courses can also be booked as in-house training sessions. Our instructors will be happy to travel directly to your place of work and train your teams on site. We can also mix and match the content of in-house courses and take a particular situation affecting your projects into account. We will be happy to write a concept proposal for your specific training requirements.

    All courses outlined in our training programme can be held in German or English. Our training materials are written in English.

    Training package: Seminar skills and attractive discounts

    • 10% early-bird booking discount if you register six or more weeks before a training session.
    • 10% group discount if you register more than one participant from your company for the same course.

    Want to save even more? Discounts can be combined for the same course.

    These conditions do not apply to VDA examination fees for Automotive SPICE® assessor training sessions or the Scaled Agile, Inc. fee for SAFe training.

    Conditions of participation

    Course fees include course materials, lunch and refreshments during breaks per person.

    This offer is only open to companies or registered tradespersons. All fees are subject to current sales tax and must be paid on receipt of invoice. Early-bird and group discounts will be subtracted as necessary from invoices.

    We will confirm receipt of your registration. Registrations can be cancelled without penalty up to 6 weeks before each individual event; 10% of the fee will be charged for courses cancelled up to 14 days before each event; 50% of the fee will be charged for courses cancelled up to 7 days before each event. Fees will not be refunded if you cancel a course less than a week before an event. You may send somebody else to take your place on a course without additional cost. All courses may be subject to change due to unforeseen circumstances.

    We charge the examination fees of third parties (such as VDC QMC and Scaled Agile Inc.) on their behalf. Such fees are not eligible for a discount.

    Your personal information will be stored by KUGLER MAAG CIE GmbH in order to organise the event. By registering for a course you also agree to us contacting you by fax, email or telephone. If you do not wish to consent to us using your information in this way, please send us a message or get in touch. You have the right to withdraw your consent to this arrangement at any time.

    DATA PROTECTION